Typical performance of BT-Maric constant flow valves

BT-Maric constant flow valves are deisgned to provide a pre-set, fixed, constant flow rate regardless of pressure. The following chart shows the typical performance of BT- Maric constant flow valves, with control rubber type Precision.

Precision control rubbers are supplied as standard. Precision rubbers offer the best flow rate accuracy and tolerate a wide range of chemical environments. This makes them suitable for most mains pressure, pumping, industrial, and water treatment applications. This product complies with the WaterMark license and AS4020 Potable Water requirement and ACS.

Preformance graph for BT-Maric constant flow valve with Precision control rubber joint

Graph: Typical performance of BT-Maric constant flow valves with control rubber joint, PrecisionThe accuracy is very precise: Nominal flow rate +/- 10% for standard applications, over the whole pressure drop range starting at 1,4 Bar up to 10 Bar. The graph shows the typical performance of BT-Maric constant flow valve with the control rubber joint, Precision regardless of size and flow rate.

If this control rubber joint is not suitable for your application, you can have a look at our brochure. You will find all available control rubber joints in our brochure or catalogue. You can order our catalogue here

For more information, you can contact our sales team.