adobestock-centrifugal-pump-protection

Pump protection

Protecting valuable pump equipment and ensuring they work at the highest efficiency, with the bare minimum of unplanned downtime is essential. BT-Maric Flow Control Valves will provide protection to your valuable equipements and pumps. BT-Maric Flow Control Valves ensure that there is an adequate “head” or discharge pressure on the pump, which can be pre-set to manufacturer’s design specifications to avoid cavitation or bearing damage. BT-Maric Flow Control Valves deliver a fixed pre-set and constant flow of water, irrespective of pressure differentials between upstream and downstream within the range of 1,4-10 bar.

BT-Maric constant flow valves will provide pump protection:

  • by keeping a pump on its curve and preventing cavitation damage.
  • by limiting peak flow rates: it will maintain adequate water availability at the suction and avoid too high flow rates so that it can be efficient
  • for use on high draw-down bores for preventing up-thrust damage
  • for preventing over-pumping beyond bores capacity & drawing in of air or sand – leading to unstable conditions
  • from overloading the electric motors, by controlling of cooling water to liquid ring vacuum pumps
  • by controlling the flow of water over the gland; limiting the dilution of slurry or product
  • by preventing unauthorised adjustments; ensuring that the flow-rate can never exceed manufacturer’s intended rate
  • by pre-setting the flow to meet the manufacturer’s design specifications; ensuring there is always head or discharge pressure on the pump

BT-Maric constant flow valves can be used in many applications with challenging environement. To know more about the different body valves material and control rubber joint, you can dowload our brochure or order our catalogue.

For more information, you can contact our sales team.